Nortel Networks 4050 manual Configuring authentication Radius Configuration fields

278Chapter 6 Configuring authentication

Table 42 Radius Configuration fields (continued)

Field	Description
Authentication Protocol	Specifies the protocol used for communication between the
	Nortel SNAS 4050 and the RADIUS server. The options
	are:
	• PAP — Password Authentication Protocol (PAP)
	• CHAPv2 — Challenge Handshake Authentication
	Protocol (CHAP), version 2
	The default is PAP.
Vendor ID	Specifies the vendor-specific attribute used by the RADIUS
	server to send a session timeout value to the Nortel
	SNAS 4050. The default Vendor-Id is 0.
	With the Vendor-Type also set to 0 (the default value), the
	RADIUS server sends the standard attribute for session
	timeout.
Vendor Type	Specifies the Vendor-Type value used in combination with
	the Vendor-Id to identify the session timeout value to send
	to the Nortel SNAS 4050. The default is 0.
State	Enables of disable retrieval of the RADIUS server session
	timeout value. The default is disabled.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A