Nortel Networks 4050 manual Customizing the portal and logon using the Srem, Enabling DNS capture

Chapter 9 Customizing the portal and user logon 417

Customizing the portal and logon using the SREM

The following section describes the SREM procedures to customize the portal and user logon. It includes the following topics:

•“Configuring the captive portal using the SREM” on page 416

•“Changing the portal language using the SREM” on page 419

•“Configuring the portal display using the SREM” on page 425

•“Changing the portal colors using the SREM” on page 431

•“Configuring custom content using the SREM” on page 433

•“Configuring linksets using the SREM” on page 439

•“Configuring links using the SREM” on page 444

Configuring the captive portal using the SREM

By default, the Nortel SNAS 4050 is set up to function as a captive portal. (For more information about the captive portal in the Nortel SNAS 4050 domain, see “Captive portal and Exclude List” on page 386.)

To configure the Nortel SNAS 4050 as a captive portal, complete the following processes:

•“Enabling DNS capture” on page 416

•“Configuring the DNS Exclude List using the SREM” on page 418

Enabling DNS capture

To configure the Nortel SNAS 4050 portal as a captive portal, perform the following steps:

1Select the Secure Access Domain > domain > DNS Capture tab. The DNS Capture screen appears (see Figure 105).

Nortel Secure Network Access Switch 4050 User Guide