Nortel Networks 4050 manual Configuring domain parameters using the CLI, Pvips IPaddr, Aaa

130Chapter 4 Configuring the domain

Configuring domain parameters using the CLI

To configure the domain, use the following command:

/cfg/domain <domain ID>

where domain ID is an integer in the range 1 to 256 that uniquely identifies the domain in the Nortel SNAS 4050 cluster.

The Domain menu displays.

The Domain menu includes the following options:

/cfg/domain <domain ID> followed by:

name <name>	Names or renames the domain.
	• name is a string that must be unique in the domain.
	The maximum length of the string is 255
	characters.
	The name is a mnemonic aid only and is not used by
	other functions.
pvips <IPaddr>	Sets the pVIP for the domain. The pVIP is the portal
	address to which clients connect in order to access the
	Nortel SNA network. For more information, see “About
	the IP addresses” on page 51.
	A domain can have more than one pVIP. To configure
	multiple IP addresses for the portal, use a comma to
	separate the IP address entries.
aaa	Accesses the AAA menu, in order to configure
	authentication, authorization, and accounting features.
	• For authentication, see “Configuring authentication”
	on page 233.
	• For authorization, see “Configuring groups and
	profiles” on page 191 and “Configuring the
	TunnelGuard check using the CLI” on page 132.
	• For accounting, see “Configuring RADIUS
	accounting using the CLI” on page 146.
server	Accesses the Server menu, in order to configure the
	portal SSL server (see “Configuring the SSL server
	using the CLI” on page 135).

320818-A