Nortel Networks 4050 manual Cfg/sys/adm/auth/servers followed by, List

494Chapter 10 Configuring system settings

The RADIUS Authentication Servers menu includes the following options:

/cfg/sys/adm/auth/servers followed by:

list	Lists the IP addresses of currently configured RADIUS
	authentication servers, by index number.
del <index number>	Removes the specified RADIUS authentication server
	from the current configuration. The index numbers of
	the remaining entries adjust accordingly.
	To view the index numbers of all configured RADIUS
	authentication servers, use the list command.
add <IPaddr> <port>	Adds a RADIUS authentication server to the
<shared secret>	configuration. You are prompted to enter the following
	information:
	• IPaddr — the IP address of the authentication
		server
	• port — the TCP port number used for RADIUS
		authentication. The default is 1813.
	•	shared secret — the password used to
		authenticate the Nortel SNAS 4050 to the
		authentication server
	The system automatically assigns the next available
	index number to the server.
insert <index number>	Inserts a server at a particular position in the list of
<IPaddr>	RADIUS authentication servers in the configuration.
	•	index number — the index number you want
		the server to have
	• IPaddr — the IP address of the authentication
		server you are adding
	The index number you specify must be in use. The
	index numbers of existing servers with this index
	number and higher are incremented by 1.
move <index number>	Moves a server up or down the list of RADIUS
<new index number>	authentication servers in the configuration.
	•	index number — the original index number of
		the server you want to move
	•	new index number — the index number
		representing the new position of the server in the
		list
	The index numbers of the remaining entries adjust
	accordingly.

320818-A