Nortel Networks 4050 Creating a certificate using the Srem, Add a Certificate Component fields

Chapter 11 Managing certificates 599

3Click Yes.

The certificate is removed from the Certificates list.

4Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Creating a certificate using the SREM

To create a certificate, perform the following steps:

1Select the Certificates > Certificates tab.

The Certificates screen appears (see Figure 172 on page 598).

2Click Add.

The Add a Certificate Component dialog box appears (see Figure 173).

Figure 173 Add a Certificate Component

3Enter the certificate information in the applicable fields. Table 124 describes the Add a Certificate Component fields.

Table 124 Add a Certificate Component fields

Field

Index

Name

Description

An integer in the range 1 to 1500 that uniquely identifies the certificate in the Nortel SNAS 4050 domain.

Names the certificate, as a mnemonic aid.

4Click Apply.

The new certificate appears in the Certificates list.

Nortel Secure Network Access Switch 4050 User Guide