Nortel Networks 4050 manual Tgsrs SRS rule name, Comment comment, Main# /cfg/domain 1/AAA/group

<group ID>

200Chapter 5 Configuring groups and profiles

/cfg/domain 1/aaa/group # followed by:

tgsrs <SRS rule name>	Specifies the preconfigured TunnelGuard SRS rule to
	apply to the group.
	For information about configuring the SRS rules using
	the SREM, see “TunnelGuard SRS Builder” on
	page 317. You cannot configure SRS rules in the CLI.
comment <comment>	Sets a comment for the group.
del	Removes the group from the Nortel SNAS 4050
	domain. When you delete the group, you also delete all
	extended profiles associated with that group ID.

Figure 38 shows sample output for the /cfg/domain 1/aaa/group command and commands on the Group menu.

Figure 38 Group menu commands

>>Main# /cfg/domain 1/AAA/group 2

Creating Group 2 Group name: TestGroup

Enter number of sessions (0 is unlimited):

----------------------------------------------------------

[Group 2 Menu]		group name
name	- Set
restrict - Set		number of login sessions
linkset	- Linkset menu
extend	- Extended profiles menu
tgsrs	- Set	TunnelGuard SRS Rule
comment	- Set	comment
del	- Remove group

>>Group 2# tgsrs Current value: ""

Enter TunnelGuard SRS rule name: TestRule

>>Group 2#

320818-A