Nortel Networks 4050 manual Root filesystem repaired

872Appendix B Syslog messages

Table 204 Syslog messages in alphabetical order (Sheet 8 of 10)

Message	Severity	Type	Explanation
Root filesystem repaired -	ERROR	OS	fsck found and fixed errors. Probably OK.
rebooting
Server <id> uses default interface	WARNING	Traffic	A specific interface is configured to be used
(interface <n> not configured)		Processing	by the server but this interface is not
			configured on the Nortel SNAS 4050.
Set CSWIFT as default	INFO	Start-up	Using CSWIFT SSL hardware acceleration.
Since we use clicerts, force adjust	INFO	Start-up	Generated if the size of the SSL session
totalcache size to : <size> per			cache has been modified.
server that use clicerts
single_master	ALARM	System	Only one master Nortel SNAS 4050 in the
	(WARNING)	Control	cluster is up and running.
socks error: <reason>	ERROR	Traffic	Error encountered when parsing the socks
		Processing	traffic from the client. Probably a
			non-standard socks client.
SOCKS Rejected Domain=”<id>”	INFO	AAA	The client failed to perform an operation by
User=”<user>” SrcIP=”<ip>”			using one of the features available under
Request=”<request>”			the portal’s Advanced tab.
socks request: socks version	ERROR	Traffic	Socks request of version <version>
<version> rejected		Processing	received and rejected. Most likely a
			non-standard socks client.
SOCKS Domain=”<id>”	INFO	AAA	The client has successfully performed an
User=”<user>” SrcIP=”<ip>”			operation by using one of the features
Request=”<request>”			available under the portal’s Advanced tab.
software_configuration_changed	EVENT	System	Indicates that release <VSN> (version) has
		Control	been <Status> (unpacked/installed/
			permanent).
software_release_copying	EVENT	System	Indicates that <IP> is copying the release
		Control	<VSN> from another cluster member.
software_release_rebooting	EVENT	System	Indicates that a Nortel SNAS 4050 (<IP>)
		Control	is rebooting on a new release (in other
			words, a Nortel SNAS 4050 that was not up
			and running during the normal installation
			is now catching up).
ssi_mipishere	EVENT	System	Tells that the MIP (management IP
		Control	address) is now located at the Nortel
			SNAS 4050 with the <IP> host IP address.
switch controller:switch	INFO	NSNAS	Switch <switchID> has been added to
[1:<switchID>] – Added			Domain 1.
switch controller:switch	INFO	NSNAS	Switch <switchID> has been deleted from
[1:<switchID>] - Deleted			Domain 1.

320818-A