Nortel Networks 4050 Managing interface ports using the CLI, Cfg/sys/host #/port port followed by

Chapter 10 Configuring system settings 473

The Host Port menu includes the following options:

/cfg/sys/host #/port <port> followed by:

autoneg onoff	Specifies the Ethernet auto-negotiation setting for the
	host and NIC port. The options are:
	• on — the port is set to auto-negotiate speed and
	mode. This is the recommended setting.
	• off — speed and mode are fixed at a specified
	setting.
	The default is on.
	When auto-negotiation is on, ensure that the device to
	which the port is connected is also set to
	auto-negotiate.
speed <speed>	Sets the speed for the host and NIC port when
	auto-negotiation is set to off.
	• speed — the port speed in megabits per second.
	The options are 101001000.
mode fullhalf	Sets the duplex mode for the host and NIC port when
	auto-negotiation is set to off. The options are full
	and half.
	The default duplex mode is full.

Managing interface ports using the CLI

To view and manage the ports assigned to an interface, use the following command:

/cfg/sys/host #/interface <interface ID>/ports

where interface ID is an integer in the range 1 to 252 that uniquely identifies the interface on the Nortel SNAS 4050 host.

The Interface Ports menu displays.

Nortel Secure Network Access Switch 4050 User Guide