Nortel Networks 4050 manual Configuring Ldap authentication using the Srem, Next steps

282Chapter 6 Configuring authentication

The RADIUS Servers screen appears (see Figure 69 on page 291).

2Select an RADIUS server entry from the RADIUS Server Table.

3Click Delete.

A confirmation dialog appears.

4Click Yes.

The RADIUS server is removed from the RADIUS Server Table.

5Click Apply on the toolbar to accept the new order, and adjust index numbers for the RADIUS servers accordingly. Click Commit on the toolbar to save the changes permanently.

Next steps

1Configure additional authentication methods, if desired (see “Configuring LDAP authentication using the SREM” on page 282 or “Configuring local database authentication using the SREM” on page 298).

2Set the authentication order (see “Specifying authentication fallback order using the SREM” on page 314).

3Commit the changes (see “Saving authentication settings” on page 316).

Configuring LDAP authentication using the SREM

To configure the Nortel SNAS 4050 to use LDAP authentication, perform the following steps:

1Add the LDAP method to the domain and specify the LDAP server (see “Adding the LDAP method and server” on page 283).

2Modify the LDAP configuration settings, if desired (see “Modifying LDAP configuration” on page 284).

3Add extra LDAP servers, for redundancy, if desired (see “Managing additional LDAP servers” on page 291).

4Add LDAP macros, if desired (see “Managing LDAP macros” on page 294).

320818-A