Nortel Networks 4050 manual Lists the Nsnas Error messages, Lists the Nsnas Info messages

864Appendix B Syslog messages

Table 202 lists the NSNAS ERROR messages.

Table 202 NSNAS — ERROR

Message	Category	Explanation/Action
Domain:1, Switch: <switchID> ERROR cmd	ERROR	An internal command between the specified
timeout for cmd :<commandID>		switch and the Nortel SNAS 4050 timed out.
		Check connectivity between the switch and
		the Nortel SNAS 4050.

Table 203 lists the NSNAS INFO messages.

Table 203 NSNAS — INFO (Sheet 1 of 2)

Message	Category	Explanation/Action
[A:B:C:D] NSNA portup	INFO	Domain A, switch B, unit C, port D Ethernet
		link is up.
[A:B:C:D] NSNA portdown	INFO	Domain A, switch B, unit C, port D Ethernet
		link is down.
LoginSucceeded Domain=”1”	INFO	On Domain 1, user “<user>” with IP : ”<IP>”
SrcIp=”<IPaddr>” Method=”ssl”		and belonging to group “<group>/<profile>/”
User=”<user>” Groups=”<group>/<profile>/ ”		has logged in.
transferring user <user> on	INFO	Client device on Domain 1, Switch <switchID>
Switch=”1:<switchID>(<IPaddr>)”,		(switch IP address <IPaddr> ), Unit <unit>,
Port=”<unit/port>” to		Port <port> is being moved to the VLAN
Vlan=”<vlan>(<vlanID>)”		named <vlan> with VLAN ID <vlanID>.
switch controller:switch [1:<switchID>] –	INFO	The CLI configuration of Domain 1, Switch
Modified		<switchID> has been modified.
switch controller:switch [1:<switchID>] –	INFO	Switch <switchID> of Domain 1 has
Disconnected		disconnected from the NSNAS.
switch controller:switch [1:<switchID>] –	INFO	Switch <switchID> has been added to Domain
Added		1.
switch controller:switch [1:<switchID>] -	INFO	Switch <switchID> has been deleted from
Deleted		Domain 1.

320818-A