Nortel Networks 4050 manual Stats/aaa followed by, Total, Isdhost host ID, Dump

668Chapter 13 Viewing system information and performance statistics

The CLI reports statistics for all authentication methods configured in the cluster, whether or not they have been included in the authentication order scheme (see “Specifying authentication fallback order using the CLI” on page 267). If the statistics for a particular authentication method are always a row of zeroes, this might be because the method is not included in the authentication order scheme.

To view authentication statistics for the Nortel SNAS 4050 cluster or for individual Nortel SNAS 4050 hosts, use the following command:

/stats/aaa

The AAA Statistics menu displays.

The AAA Statistics menu includes the following options:

/stats/aaa followed by:

total	Displays authentication statistics by domain for all
	Nortel SNAS 4050 hosts in the cluster since the system
	was started.
isdhost <host ID>	Displays authentication statistics for the specified
<domain ID>	Nortel SNAS 4050 host in the cluster since the system
	was started. You are prompted to specify:
	•	<host ID> — the index number automatically
		assigned to the Nortel SNAS 4050 host when you
		performed the initial setup.
	•	<domain ID> — the index number automatically
		assigned to the Nortel SNAS 4050 domain when
		you created it. To view statistics for all domains,
		enter 0.
	Note: With Nortel Secure Network Access Switch
	Software Release 1.0, there is only one domain in the
	system.
dump	Dumps all authentication statistics in the CLI,
	presenting them first by domain and then by Nortel
	SNAS 4050 host. The display includes the number of
	accepted and rejected requests for all configured
	authentication methods, as well as the number of
	accepted and rejected connections by license type
	(SSL). In the case of the licenses statistics, the value
	reported as Rejected refers to connections exceeding
	the allowed number of concurrent users.

320818-A