Nortel Networks 4050 manual Switch Configuration fields

Chapter 3 Managing the network access devices 95

2Enter the network access device information in the applicable fields. Table 4 describes the Switch Configuration fields.

Table 4 Switch Configuration fields

Field	Description
Index	An integer that uniquely identifies the network access
	device in the Nortel SNAS 4050 domain.
Name	Names or renames the switch. After you have defined a
	name for the switch, you can use either the switch name or
	the switch ID to access the network access device.
	Accepts a string that must be unique in the domain. The
	maximum length of the string is 255 characters.
IP Address	Specifies the IP address of the switch.
NSNA Communication Port	Specifies the TCP port for communication between the
	Nortel SNAS 4050 and the network access device.
	The default value is 5000
Type	Specifies the type of network access device. Valid options
	are:
	• ERS8300 — an Ethernet Routing Switch 8300
	• ERS5500 — an Ethernet Routing Switch 5510, 5520,
	or 5530
Red VLAN ID	Identifies the Red VLAN ID for the network access device,
	as configured on the switch
Enable Switch	Enables or disables the switch. As soon as you enable the
	switch, the Nortel SNAS 4050 begins communicating with
	the switch and controlling its Nortel SNA clients.
User Name on Switch	The name of an administrative user (rwa) on the network
	access device (required for Ethernet Routing Switch 8300
	only).
Reset Switch Ports	Resets all the Nortel SNA-enabled ports on the switch.
	Clients connected to the ports are moved into the Red
	VLAN.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide