Nortel Networks 4050 manual Reordering additional Radius servers, Removing a Radius server

Chapter 6 Configuring authentication 281

Table 43 Add a Radius Server fields (continued)

Field

Port

Secret

Description

Specifies the port number configured for this server to use on the RADIUS server. The default is 1812.

Specifies a unique shared secret configured on the RADIUS server that authenticates the Nortel SNAS 4050 to the RADIUS server.

4Click Apply.

The new RADIUS server is automatically assigned a unique index number, and appears in the RADIUS Server Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Reordering additional RADIUS servers

To adjust the order in which RADIUS servers are used, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Authentication > radius > Radius Servers tab.

The RADIUS Servers screen appears (see Figure 69 on page 291).

2Select an RADIUS server entry from the RADIUS Server Table.

3Use the up and down arrows to reposition the selected entry.

4Click Apply on the toolbar to accept the new order, and adjust index numbers for the RADIUS servers accordingly. Click Commit on the toolbar to save the changes permanently.

Removing a RADIUS server

To remove an existing RADIUS server from the RADIUS Server Table, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Authentication > radius > Radius Servers tab.

Nortel Secure Network Access Switch 4050 User Guide