Nortel Networks 4050 manual 320818-A

122Chapter 4 Configuring the domain

When you first create the domain, you are prompted to enter the following parameters:

•domain name — a string that identifies the domain on the Nortel SNAS 4050, as a mnemonic aid. The maximum length of the string is 255 characters.

•portal Virtual IP address (pVIP) — the IP address of the Nortel SNAS 4050 portal. You can have more than one pVIP for a domain. To specify more than one pVIP, use a comma separator. The pVIP is the address to which the client connects for authentication and host integrity check. For more information, see “About the IP addresses” on page 51.

The Domain menu displays.

Figure 17 on page 123 shows sample output for the /cfg/domain

<domain ID> command and commands on the Domain menu. For more information about the Domain menu commands, see “Configuring domain parameters using the CLI” on page 130.

320818-A