Nortel Networks 4050 manual Configuring the access list using the Srem

Chapter 10 Configuring system settings 525

The port is removed from the Port Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Configuring the access list using the SREM

The access list is a cluster-wide list of IP addresses for hosts authorized to access the Nortel SNAS 4050 devices by Telnet, SSH, and SREM. You can configure the list to allow access by individual machines or a range of machines on a specific network.

If the access list is empty, then access is open to any machine.

For information about enabling Telnet and SSH access, see “Configuring administrative settings using the CLI” on page 483 or “Configuring administrative settings using the SREM” on page 546.

To configure the access list, select the System > Access List tab.

Nortel Secure Network Access Switch 4050 User Guide