Nortel Networks 4050 manual Saving authentication settings

316Chapter 6 Configuring authentication

3Rearrange the list so that the methods appear in the desired order. a Click on a method to select it.

b Using the up and down arrows, move the method to the desired position in the list.

c Repeat for the other methods until the list is in the desired order.

4Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Saving authentication settings

To save changes to the current configuration at any time, perform the following steps:

1Send changes to the Nortel SNAS 4050 using one of the following procedures:

a Click Apply on the toolbar to immediately accept all changes.

b Click the Change Manager icon in the bottom right corner to view and confirm the list of change current changes.

Note: A confirmation dialog may appear before entering the Change Manager screen, asking if you want to review the changes and apply them to the device. If this dialog does appear, click No to continue viewing the Change Manager.

The Change Manager allows you to review or remove specific changes before clicking Apply All.

2Click Diff to view pending changes on the Nortel SNAS 4050.

3Do one of the following to implement or remove pending changes:

a To implement the changes and alter the configuration permanently, click Commit on the toolbar.

b To discard the changes and revert to the previous configuration, click Revert on the toolbar.

320818-A