Nortel Networks 4050 Paste, Exit, Quit, Netstat, Nslookup, Ping IPaddr, Traceroute, Curb

	Appendix A CLI reference 805
Table 179 Global commands (Sheet 2 of 3)
Command	Action
paste	Restores a saved configuration that includes private keys. TIP: Before you paste the
	configuration, you must provide the password phrase you specified when you
	selected include the private keys in the configuration dump. For more information,
	see the dump command in “Configuration menu” on page 816.
exit	Terminate the current session and log out. TIP: You are notified if there are unapplied
	(pending) configuration changes when you execute the exit command. Pending
	configuration changes are lost if you log out without executing the apply command.
quit	Terminate the current session and log out. TIP: You are notified if there are unapplied
	(pending) configuration changes when you execute the quit command,. Pending
	configuration chagnes are lost if you log out without executing the apply command.
Ctrl+^	Exit from the command line interface if the Nortel Secure Network Access
	Switch 4050 has stopped responding. TIP: This command should be used only when
	you are connected to a specific Nortel Secure Network Access Switch 4050 through
	a console connection. Do not use this command when connected to the
	Management IP of the cluster through a Telnet or SSH connection.
netstat	Show the current network status of the Nortel Secure Network Access Switch 4050.
	The netstat command provides information about active TCP connections, the
	state of all TCP/IP servers, and the sockets the servers use.
nslookup	Find the IP address or host name of a machine. TIP: To use the nslookup
	command, the Nortel Secure Network Access Switch 4050 must be configured to
	use a DNS server.
ping <IPaddr	Verify station-to-station connectivity across the network. TIP: You can specify an
or host name>	IP address or host name in the command. To specify host names, you must
	configure the DNS parameters.
traceroute	Identify the route used for station-to-station connectivity across the network. TIP: You
<IPaddr or	can specify an IP address or host name of the target station in the command. To
host name>	specify host names, you must configure the DNS parameters.
cur	View all the current settings for the active menu.
curb	Obtain a summary of the current settings for the active menu.
dump	Dump the current configuration for the active menu. TIP: You can cut and paste the
	dumped information into the CLI of another operator at the same menu level. In all
	Statistics menus, the dump command provides statistics information for the active
	menu.
lines <n>	Set the number of lines (n) that display on the screen at one time. TIP: The default
	value is 24 lines. When used without a value, the current setting displays.

Nortel Secure Network Access Switch 4050 User Guide