Nortel Networks 4050 manual Supported traps, Describes the traps supported by the Nortel Snas

Appendix C Supported MIBs 879

Supported traps

Table 206 describes the traps supported by the Nortel SNAS 4050.

Table 206 Supported traps

Trap Name	Description
authenticationFailure	Sent when the SNMP agent receives an SNMP message which is not
	properly authenticated. This trap is disabled by default. To enable the
	trap through SNMP, set snmpEnableAuthenTraps to enabled or
	use the CLI command /cfg/sys/adm/snmp/snmpv2-mib/
	snmpenable.
	Defined in SNMPv2-MIB.
coldStart	Sent when the Nortel SNAS 4050 reboots.
	Defined in SNMPv2-MIB.
isdAlarmCleared	Sent when an alarm is cleared.
isdDown	Signifies that a Nortel SNAS 4050 device in the cluster is down and
	out of service.
isdLicense	Sent when the Nortel SNAS 4050 devices in the cluster have different
	licenses and when a demo license has seven days left before
	expiration.
	Defined in ALTEON-ISD-PLATFORM-MIB.
isdLicenseExpired	Sent when a license has expired.
isdMipMigration	Signals that the master IP has migrated to another Nortel
	SNAS 4050.
isdSingleMaster	Signifies that only one master Nortel SNAS 4050 in the cluster is up
	and operational. Only having one master in a cluster means that the
	fault tolerance level is severely degraded — if the last master fails, the
	system cannot be reconfigured.
linkDown	Sent when the agent detects that one of the links (interfaces) has
	gone down.
	Defined in IF-MIB.
linkUp	Sent when the agent detects that one of the links (interfaces) has
	gone up.
	Defined in IF-MIB.

Nortel Secure Network Access Switch 4050 User Guide