Nortel Networks 4050 Configuring Http redirect using the CLI, Cfg/domain #/httpredir, Redir onoff

144Chapter 4 Configuring the domain

/cfg/domain #/server/adv/traflog

followed by:

dis

Disables traffic logging with syslog messages.

Traffic logging with syslog messages is disabled by default.

Configuring HTTP redirect using the CLI

You can configure the Nortel SNAS 4050 domain to automatically redirect HTTP requests to the HTTPS server. For example, a client request directed to http://nsnas.com is automatically redirected to https://nsnas.com.

To configure the domain to automatically redirect HTTP requests to the HTTPS server specified for the domain, use the following command:

/cfg/domain #/httpredir

The Http Redir menu displays.

The Http Redir menu includes the following options:

/cfg/domain #/httpredir followed by:

port <port>	Specifies the port to which the portal server listens for
	HTTP communications.
	• port is an integer that indicates the TCP port
	number. The default is 80.
	Note: If you do not accept the default value and you
	specify a different port, you must modify the Red and
	Yellow filters on the network access devices
	accordingly. Otherwise, the client PC will not be able to
	reach the portal for user authentication.
redir onoff	Specifies whether HTTP requests will be redirected to
	the HTTPS server.
	• on — HTTP redirect is enabled
	• off — HTTP redirect is disabled
	The default is off.

320818-A