Nortel Networks 4050 manual Configuring Radius authentication using the Srem

Chapter 6 Configuring authentication 271

2Click Add.

The Add an Authentication Server dialog box opens (see Figure 61 on page 272).

3In the list, select the authentication type you want to add. Available options are:

—Radius

—LDAP

—Local

The default value is Radius. Fields displayed on the Add an Authentication Server dialog change, depending on the method you select.

4Continue with the appropriate section for the authentication method being added:

•For RADIUS authentication, go to “Configuring RADIUS authentication using the SREM” on page 271

•For LDAP authentication, go to “Configuring LDAP authentication using the SREM” on page 282

•For Local authentication, go to “Configuring local database authentication using the SREM” on page 298

Configuring RADIUS authentication using the SREM

To configure the Nortel SNAS 4050 to use RADIUS authentication, perform the following steps:

1Add the RADIUS method to the domain and specify the RADIUS server (see “Adding the RADIUS method and server” on page 272)

2Modify the RADIUS configuration settings, if desired (see “Modifying RADIUS configuration” on page 273)

3Add extra RADIUS servers, for redundancy, if desired (see “Managing additional RADIUS servers” on page 279)

Nortel Secure Network Access Switch 4050 User Guide