Nortel Networks 4050 manual CLI Main Menu, CLI command reference

812Appendix A CLI reference

CLI Main Menu

The Main menu appears after a successful connection and login. Figure 244 represents the Main menu as it appears when logged on as Administrator. Note that some of the commands are not available when logged on as Operator.

Figure 244 CLI main menu

[Main Menu]	- Information menu
info
stats	- Statistics menu
cfg	- Configuration menu
boot	- Boot menu
maint	- Maintenance menu	[global command]
diff	- Show pending config changes
apply	- Apply pending config changes	[global command]
revert	- Revert pending config changes [global command]
paste	- Restore saved config with key [global command]
help	- Show command help	[global command]
exit	- Exit [global command, always available]

CLI command reference

The following CLI menus are accessible from the Main menu:

•Information — provides submenus for displaying information about the current status of the Nortel Secure Network Access Switch 4050. For the Information menu commands, see “Information menu” on page 814.

•Statistics — provides submenus for displaying Nortel SNAS 4050 performance statistics. For the Statistics menu commands, see “Statistics menu” on page 815.

•Configuration — provides submenus for configuring the Nortel SNAS 4050 cluster. Some of the commands in the Configuration menu are available only when logged on as Administrator. For the Configuration menu commands, see “Configuration menu” on page 816.

•Boot — used for upgrading Nortel SNAS 4050 software and for rebooting Nortel SNAS 4050 devices. The Boot menu is accessible only when logged on as Administrator. For the Boot menu commands, see “Boot menu” on page 835.

320818-A