Nortel Networks 4050 manual Managing Radius audit settings using the Srem, Add SSH Key fields

554Chapter 10 Configuring system settings

2Enter the remote host information in the applicable fields. Table 115 describes the Add SSH Key fields.

Table 115 Add SSH Key fields

Field	Description
Host name or IP Address	Specifies the host whose SSH key you are adding. You can
	provide a comma-separated list of names and
	IP addresses for the host.

3Click Paste to enter the contents of a downloaded SSH key file in the box provided.

Valid formats are:

•RSA1 keys — the OpenSSH implementation (native format or with the line wrapped)

•RSA and DSA keys — the SECSH Public Key File Format, as described in Internet Draft draft-ietf-secsh-publickeyfile

4Click Add.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Managing RADIUS audit settings using the SREM

You can configure the Nortel SNAS 4050 cluster to include a RADIUS server to receive log messages about commands executed in the CLI or the SREM, for audit purposes.

About RADIUS auditing

An event is generated whenever a system user logs on, logs off, or issues a command from a SREM session. The event contains information about user name and session ID, as well as the name of executed commands. You can configure the system to send the event to a RADIUS server for audit trail logging, in accordance with RFC 2866 (RADIUS Accounting).

If auditing is enabled but no RADIUS server is configured, events will still be generated to the event log and any configured syslog servers.

320818-A