Nortel Networks 4050 manual Using the quick TunnelGuard setup wizard in the CLI

134 Chapter 4 Configuring the domain

/cfg/domain #/aaa/tg followed by:

details onoff	Specifies whether SRS failure details can be displayed
	on the portal page.
	Valid options are:
	• on — details will be displayed
	• off — details will not be displayed
	The default is off.
	If set to on, the client can click on the TG icon on the
	portal page to display details about which elements of
	the SRS rule check failed.
loglevel	Sets the log level for debug information from the
fatalerrorwarning	TunnelGuard applet. The options are:
infodebug	• fatal — displays fatal errors only
	• error — displays all errors
	• warning — displays warning information about
	conditions that are not error conditions
	• info — displays high-level information about
	processes
	• debug — displays detailed information about all
	processes
	The default is info.
	The information displays in the client’s Java Console
	window. You can use the information to track errors in
	the TunnelGuard SRS rules.

Using the quick TunnelGuard setup wizard in the CLI

To configure the settings for the SRS rule check using the TunnelGuard quick setup wizard, use the following command:

/cfg/domain #/aaa/tg/quick

The TunnelGuard quick setup wizard is similar to the last few steps of the Nortel SNAS 4050 domain quick setup wizard. The wizard prompts you for the following information:

•the action to be performed if the TunnelGuard check fails (see step 12 on page 127)

•whether you want to create a test user (see step 13 on page 127)

320818-A