Nortel Networks 4050 manual Cfg/domain #/server/portal, Authenticate is set to off

870Appendix B Syslog messages

Table 204 Syslog messages in alphabetical order (Sheet 6 of 10)

Message	Severity	Type	Explanation
make_software_release_permane	ALARM	System	Failed to make a new software release
nt_failed	(CRITICAL)	Control	permanent after being activated. The
			system will automatically revert to the
			previous version.
Missing files in config filesystem	ERROR	OS	Possible loss of configuration. Followed by
			the message “Config filesystem
			re-initialized - reinstall required” or “Config
			filesystem restored from backup”.
No cert supplied by backend	INFO	Traffic	No certificate supplied by backend server
server		Processing	when doing SSL connect. Session
			terminated to backend server.
No CN supplied in server cert	INFO	Traffic	No CN found in the subject of the certificate
<subject>		Processing	supplied by the backend server.
No more than <nr> backend	INFO	Start-up	Generated when more than the maximum
supported			allowed backend servers have been
			configured.
No PortalGuard license loaded:	WARNING	Traffic	The PortalGuard license has not been
Domain <id> *will* use portal		Processing	loaded on the Nortel SNAS 4050 but
authentication			/cfg/domain #/server/portal/
			authenticate is set to off.
No Secure Service Partitioning	WARNING	Traffic	The Secure Service Partitioning license
loaded: server <id> *will not* use		Processing	has not been loaded on the Nortel
interface <n>			SNAS 4050 but the server is configured to
			use a specific interface.
No TPS license limit	INFO	Start-up	Unlimited TPS license used.
NSNAS AddressAssigned	INFO	AAA	Source IP address for the connection
Domain=”<id>” Method=<”ssl”>			between the Nortel SNAS 4050 and the
SrcIp=”<ip>” User=”<user>”			destination address (inner tunnel) has been
TunIP=”<inner tunnel ip>”			allocated.
NSNAS LoginFailed	INFO	AAA	Logon to the Nortel SNAS 4050 domain
Domain=”<id>” Method=<”ssl”>			failed. The client’s access method, IP
SrcIp=”<ip>” [User=”<user>”]			address, and user name is shown.
Error=<error>
NSNAS LoginSucceeded	INFO	AAA	Login to the Nortel SNAS 4050 domain
Domain=”<id>” Method=<”ssl”>			succeeded. The client’s access method, IP
SrcIp=”<ip>” User=”<user>”			address, user name and group
Groups=”<groups>”			membership is shown.

320818-A