Nortel Networks 4050 manual Domain Quick Wizard Switch dialog box appears see Figure

Chapter 4 Configuring the domain 161

The Domain Quick Wizard — Switch dialog box appears (see Figure 26).

Figure 26 Domain Quick Wizard – Switch

11To configure a switch, enter the network access device information in the applicable fields. If you don’t want to add a switch at this time, continue with step 12.

Table 17 describes the Switch fields.

Table 17 Domain Quick Wizard — Switch fields

Field	Description
Configure a Switch	Specifies whether or not to add a network access device to
	the domain.
Type of Switch	Specifies the type of network access device from the list.
	Valid options are ERS8300 and ERS5500.
VlanId	Specifies the Red VLAN ID for the network access device.
IP Address of Switch	Specifies the IP address of the network access device.
NSNA Communication Port	Specifies the TCP port used for communication with the
	Nortel SNAS 4050. The default is port 5000.
Key For Switch	Allows you to paste in the switch public SSH key if it was
	not automatically retrieved. Alternatively, you can later
	import the key from the switch (see “Managing SSH keys
	using the SREM” on page 102).

12Click Next.

Nortel Secure Network Access Switch 4050 User Guide