514Chapter 10 Configuring system settings

Removing a host interface

To delete a host interface, perform the following steps:

1Select the System > Hosts > host > Interfaces tab.

The Interfaces screen appears (see Figure 133 on page 508).

2Select an interface from the list.

3Click Delete.

A confirmation dialog appears.

4Click Yes.

The interface is removed from the Interfaces list.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Configuring static routes using the SREM

Static routes can be applied to a cluster, a host, or a particular interface. To view or configure static routes at a particular level, choose from the following sections:

“Viewing static routes for a cluster” on page 515

“Viewing static routes for a host” on page 516

“Viewing static routes for an interface” on page 517

All static route are configured the same way, as described in “Managing static routes” on page 517.

320818-A

Page 514
Image 514
Nortel Networks 4050 manual Configuring static routes using the Srem, Removing a host interface