Nortel Networks 4050 manual Add a Secure Access Domain fields

Chapter 4 Configuring the domain 153

2Click Add.

The Add a Secure Access Domain dialog box appears (see Figure 20).

Figure 20 Add a Secure Access Domain

3Enter the domain information in the applicable fields. Table 12 describes the Add a Secure Access Domain fields.

Table 12 Add a Secure Access Domain fields

Field	Description
Index	Specifies an integer in the range 1 to 256 that uniquely
	identifies the domain in the Nortel SNAS 4050 cluster.
Domain Name	Specifies a string that identifies the domain on the Nortel
	SNAS 4050, as a mnemonic aid. The maximum length of
	the string is 255 characters.
Portal VIP Address	Specifies the IP address of the Nortel SNAS 4050 portal.
	You can have more than one portal VIP (pVIP) for a
	domain. To specify more than one pVIP, use a comma
	separator.
	The pVIP is the address to which the client connects for
	authentication and host integrity check. For more
	information, see “About the IP addresses” on page 51.

4Click Apply.

The new domain appears in the Secure Access Domain Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide