Nortel Networks 4050 manual Adding VLANs to a switch

Chapter 3 Managing the network access devices 101

•“Removing VLANs from a switch” on page 102

Adding VLANs to a switch

To add VLANs to a switch, complete the following steps:

1Select the Secure Access Domain > domain > Switches > switch > VLANs tab.

The switch VLANs screen appears (see Figure 10 on page 100).

2Click Add.

The Add a new VLAN dialog box appears (see Figure 11).

Figure 11 Add a new VLAN

3Enter the VLAN information in the applicable fields. Table 5 describes the Add a new VLAN fields.

Table 6 Add a new VLAN fields

Field

Name

ID

Description

The name of the VLAN, as configured on the switch.

The ID of the VLAN, as configured on the switch.

4Click Add.

The new VLAN appears in the VLAN Table.

5Repeat this step for each Green and Yellow VLAN configured on the network access device.

6Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide