Nortel Networks 4050 manual Removing monitor events, Boolean monitors

650Chapter 12 Configuring SNMP

Depending on the type of monitor selected, the fields displayed on the Configuration tab will change. For descriptions of the displayed fields, refer to the appropriate section:

•“Boolean monitors” on page 650

•“Threshold monitors” on page 652

•“Existence monitors” on page 654

Removing monitor events

To delete a monitor event, perform the following steps:

1Select the System > Administrative > SNMP > Event > Monitor Table tab. The Monitor Table appears (see Figure 188).

2Select the monitor event to be removed from the Monitor Table.

3Click Delete.

A confirmation dialog box appears.

4Click Yes.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Boolean monitors

Boolean monitors check the value of a monitored OID against a specific value, and trigger an event if the result matches the desired operation.

320818-A