Nortel Networks 4050 manual Specify whether the SSL server uses chain certificates

126Chapter 4 Configuring the domain

cTo continue, go to step 8 on page 126.

Use existing certificate (no/1) [no]: Create a test certificate? (yes/no): yes

The combined length of the following parameters may not exceed 225 bytes.

Country Name (2 letter code):

State or Province Name (full name): Locality Name (eg, city): Organization Name (eg, company): Organizational Unit Name (eg, section):

Common Name (eg, your name or your server's hostname): Email Address:

Subject alternative name (blank or comma separated list of URI:<uri>, DNS:<fqdn>, IP:<ip-address>, email:<email-address>):

Valid for days [365]:

Key size (512/1024/2048/4096) [1024]:

8Specify whether the SSL server uses chain certificates.

Do you require chain certificates (yes/no) [no]:

9If you want to enable HTTP to HTTPS redirection, create a redirect server.

Do you want an http to https redirect server (yes/no) [no]:

10Specify whether you want to add a network access device to the domain.

Do you want to configure a switch? (yes/no) [no]:

If you do want to add a network access device, enter yes to launch the quick switch wizard. Go to step 11 on page 127.

If you do not want to add a network access device at this time, press Enter to accept the default value (no). Go to step 12 on page 127.

320818-A