Nortel Networks 4050 manual Moving a Radius accounting server using the Srem

188Chapter 4 Configuring the domain

3Enter the RADIUS accounting server information in the applicable fields. Table 29 describes the Radius Accounting Server fields.

Table 29 Radius Accounting Server fields

Field	Description
IP Address	Specifies the IP address of the accounting server
Port	Specifies the TCP port number used for RADIUS
	accounting. The default is 1813
Secret	Specifies the password used to authenticate the Nortel
	SNAS 4050 to the accounting server.

4Click Add.

The RADUIS accounting server appears in the Radius Accounting Server Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Moving a RADIUS accounting server using the SREM

To arrange the order of the RADIUS accounting servers, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Radius Accounting > Radius Accounting Servers tab.

The Radius Accounting Servers screen appears (see Figure 36 on page 187), listing all servers in the Radius Accounting Server Table.

2Select the RADIUS accounting server entry from the list.

3Click either the up or down arrows until the RADIUS accounting server entry is positioned correctly.

The index values do not update until you apply the changes.

4Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A