100Chapter 3 Managing the network access devices

Mapping VLANs by switch

To map VLANs by switch, you must first disable the network access device (see “Managing network access devices using the SREM” on page 91). Once the network access device is disabled, select the Secure Access Domain > domain > Switches > switch > VLANs tab.

The switch VLANs screen appears (see Figure 10), listing all current VLANs applied to the switch.

Figure 10 Switch VLANs screen

This screen allows you to manage VLANs on the switch by adding or deleting entries in the VLAN Table. For detailed steps on adding or removing switch VLANs, see:

“Adding VLANs to a switch” on page 101

320818-A

Page 100
Image 100
Nortel Networks 4050 manual Mapping VLANs by switch, Switch VLANs screen