Nortel Networks 4050 manual Adding VLANs to a domain, Add a new Vlan fields

98Chapter 3 Managing the network access devices

Adding VLANs to a domain

To add VLANs to a domain, complete the following steps:

1Select the Secure Access Domain > domain > VLANs tab. The domain VLANs screen appears (see Figure 8 on page 97).

2Click Add.

The Add a new VLAN dialog box appears (see Figure 6).

Figure 9 Add a new VLAN

3Enter the VLAN information in the applicable fields. Table 5 describes the Add a new VLAN fields.

Table 5 Add a new VLAN fields

Field

Name

ID

Description

The name of the VLAN, as configured on the domain.

The ID of the VLAN, as configured on the domain.

4Click Add.

The new VLAN appears in the VLAN Table.

5Repeat this step for each Green and Yellow VLAN configured on the domain.

6Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A