Nortel Networks 4050 manual Mapping linksets to a group or profile using the Srem

Chapter 5 Configuring groups and profiles 223

2Enter the Extended Profile information in the applicable fields. Table 36 describes the Extended Profile Configuration fields.

Table 36 Extended Profile Configuration fields

Field	Description
Index	An integer in the range 1 to 63 that uniquely identifies the
	profile in the group.
	The default value for this field is the lowest unused index
	number available. This value cannot be changed after the
	extended profile is created.
Filter Name	The name of the predefined client filter that determines
	whether the Nortel SNAS 4050 will apply this extended
	profile to the user.
VLAN Name	The name of the VLAN to which the Nortel SNAS 4050 will
	assign users with this profile.

3Click Apply to create the new extended profile.

The new extended appears appears in the list on the Extended Profiles tab.

Mapping linksets to a group or profile using the SREM

You can tailor the portal page for different users by mapping preconfigured linksets to groups and extended profiles. Linksets configured for a group display on the portal page after the linksets configured for the user’s extended profile.

For information about configuring linksets, see “Configuring linksets using the SREM” on page 439.

Topics in this section include:

•“Mapping linksets to a group” on page 224

•“Mapping linksets to a profile” on page 227

Nortel Secure Network Access Switch 4050 User Guide