Nortel Networks 4050 manual Adding an Ldap server, Click Apply, Add an Ldap Server fields

292Chapter 6 Configuring authentication

The LDAP Server Table allows you to manage additional LDAP servers by performing any of the following procedures:

•“Adding an LDAP server” on page 292

•“Reordering additional LDAP servers” on page 293

•“Removing an LDAP server” on page 293

Adding an LDAP server

To add an additional LDAP server, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Authentication > ldap > LDAP Servers tab.

The LDAP Servers screen appears (see Figure 69 on page 291).

2Click Add.

The Add an LDAP Server dialog box appears (see Figure 70).

Figure 70 Add an LDAP Server

3Enter the LDAP server information in the applicable fields. Table 47 describes the Add an LDAP Server fields.

Table 47 Add an LDAP Server fields

Field	Description
IP Address	Specifies the IP address of the LDAP server.
Port	Specifies the port number configured for this server to use
	on the LDAP server. The default is 1812.

4Click Apply.

320818-A