Nortel Networks 4050 manual Configuring local database authentication using the Srem

298Chapter 6 Configuring authentication

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Next steps

1Configure additional authentication methods, if desired (see “Configuring RADIUS authentication using the SREM” on page 271 or “Configuring local database authentication using the SREM” on page 298).

2Set the authentication order (see “Specifying authentication fallback order using the SREM” on page 314).

3Commit the changes (see “Saving authentication settings” on page 316).

Configuring local database authentication using the SREM

Note: If you ran the quick setup wizard during initial setup, Local database authentication has been created with authentication ID = 1. The database contains one test user (tg), who belongs to a group called tunnelguard. To continue configuring the local database, go to “Populating the database” on page 301.

To configure the Nortel SNAS 4050 to use a local database for authentication, perform the following steps:

1Add the Local method to the domain and create the local database (see “Adding the Local method” on page 299).

2Populate the database (see “Populating the database” on page 301).

3Modify the local database settings, if desired (see “Modifying Local database configuration” on page 305).

4Export the local database, if desired (see “Exporting the database” on page 312).

320818-A