Nortel Networks 4050 manual Server Configuration fields

Chapter 4 Configuring the domain 175

2Enter the server information in the applicable fields. Table 24 describes the server Configuration fields.

Table 24 Server Configuration fields

Field	Description
Port	Specifies the port to which the portal server listens for
	HTTPS communications.
	Accepts an integer in the range 1–65534 that indicates the
	TCP port number. The default is 443.
DNS Name	Specifies a DNS name for the portal IP address.
	Accepts the fully qualified domain name (FQDN) of the
	pVIP (for example, nsnas.example.com).
	Generally, you need to specify a DNS name only if your
	corporate DNS server is unable to perform reverse lookups
	of the portal IP address.
	When you press Apply after specifying the DNS name, the
	system performs a check against the DNS server included
	in the system configuration to verify that:
	• the FQDN is registered in DNS
	• the resolved IP address corresponds to the pVIP

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide