Nortel Networks 4050 manual Configuring authentication

244Chapter 6 Configuring authentication

•vendor type for group — corresponds to the Vendor-Type value used in combination with the Vendor-Id to identify the groups to which the user belongs. The group names to which the vendor-specific attribute points must match names you define on the Nortel SNAS 4050 using the /cfg/domain 1/aaa/group <group ID> command (see “Configuring groups using the CLI” on page 198). The default is 1.

If you set the vendor ID to 0 in order to use a standard RADIUS attribute (see vendor ID), set the vendor type to a standard attribute type as defined in RFC 2865. For example, to use the standard attribute Class, set the vendor ID to 0 and the vendor type to 25.

•vendor ID for domain — corresponds to the vendor-specific attribute used by the RADIUS server to send domain names to the Nortel SNAS 4050. The default Vendor-Id is 1872 (Alteon).

•vendor type for domain — corresponds to the Vendor-Type value used in combination with the Vendor-Id to identify the domain. The default is 3.

The Authentication menu displays.

320818-A