Nortel Networks 4050 Modifying Local database configuration, Import Local User Database fields

Chapter 6 Configuring authentication 305

2Enter the import information in the applicable fields. Table 45 describes the Import Local User Database fields.

Table 51 Import Local User Database fields

Field	Description
Protocol	Specifies the import protocol. Options are:
	•	ftp
	•	tftp
	•	sftp
	•	scp
	The default is ftp.
Host	Specifies the host name or IP address of the server.
Filename	Specifies the name of the database file on the server.
Pass Phrase/Key	Specifies the password key for user password protection.
	For a database file whose passwords were protected with a
	key when the file was exported, the key you must provide is
	the same as the password key provided at the time of
	export. If the file is not protected with a key, enter any
	characters (a minimum of four) when prompted.
Username	For FTP, SFTP, and SCP, the user name and password to
	access the file exchange server.
Password	For FTP, SFTP, and SCP, the user name and password to
	access the file exchange server.

3Click Apply on the toolbar to import the specified local user database.

Modifying Local database configuration

You can modify the Local configuration in the following ways:

•Modify settings for the authentication method itself (see “Modifying Local method settings” on page 306).

•Modify user settings in the local database (see “Modifying local users” on page 307).

•Modify user passwords in the local database (see “Modifying local user passwords” on page 309).

Nortel Secure Network Access Switch 4050 User Guide