Nortel Networks 4050 manual Removing Snmp targets

Chapter 12 Configuring SNMP 639

2Modify the SNMP Target information in the applicable fields. Table 134 describes the SNMP Target fields.

Table 134 SNMP Target fields

Field	Description
Index	Specifies a unique integer to identify this SNMP target on
	the Nortel SNAS 4050.
	This field cannot be modified after an SNMP Target is
	added.
IP Address	Specifies the IP address of the SNMP manager, to which
	trap messages are sent.
Port	Specifies the TCP port number used by the SNMP
	manager.
Version	Specifies the SNMP version used by the SNMP manager.
	The options are:
	• v1 — use SNMPv1
	• v2c — use SNMPv2c
	• v3 — use SNMPv3
SNMPv3 User	Specifies the USM user name.
	A list of all current SNMPv3 users is provided to choose
	from. To leave the association empty, select the <No
	selection> option.
	This field is only available if the SNMP version selected is
	SNMPv3.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Removing SNMP targets

To delete an existing SNMP target, perform the following steps:

1Select the System > Administrative > SNMP > SNMP Targets > SNMP Target Table tab.

The SNMP Target Table appears (see Figure 182 on page 635).

2Select the SNMP target to remove from the SNMP Target Table.

3Click Delete.

Nortel Secure Network Access Switch 4050 User Guide