Pioneer AVIC-Z1 Using the Demonstration Guid- ance, Correcting the Current Location

NAVI

Using the Demonstration Guid- ance

This is a demonstration function for shops. After a route is set, the simulation of the route guid- ance to a destination is automatically displayed. Normally, set this to [Off].

1 Touch [Settings] in the navigation menu.

2 Touch [Demo Mode] to change the set- ting.

Each time you touch the key changes that set- ting.

On:

Repeat demo drive.

Off*:

Demo Mode is set off.

Modifying the General Settings for Navigation Functions Chapter 10

Correcting the Current Location

Touch the screen to adjust the current position and direction of the vehicle displayed on the map.

1 Touch [Settings] in the navigation menu, then touch [Modify Current Location].

2 Scroll the position where you want to set, then touch [OK].

3 Touch the arrow key on the screen to set the direction, then touch [OK].

Restoring the Default Setting

Reset various settings registered to the naviga- tion system and restores to the default or factory settings.

1 Touch [Settings] in the navigation menu,

then touch [Restore Factory Settings].

2 Touch [Yes] to clear the current setting.

❒Touch [Back] to cancel clear the current setting.

➲“Returning the Navigation System to the Default or Factory Settings” ➞ Page 175

98