Pioneer AVIC-Z1 Operating the DVD, Selecting DVD as the source, Screen configuration, Chapter

❒ When playing back files recorded as VBR

AV	(variable bit rate) files, the play time will not be
	correctly displayed if fast forward or reverse
	operations are used.

❒If you are using a folder that does not contain an MP3 file, the folder itself will display but you will not be able to see or play any files in that folder.

❒The maximum umber of characters are 32 characters including extension (.mp3). But the navigation system incorporates the pro- portional font. Therefore, the number of the characters which you can display varies according to which of each character.

❒If the built-in DVD drive does not operate prop- erly, an error message may be displayed.

➲Error messages ➞ Page 188

Chapter 11

Using the AV Source (Built-in DVD Drive and Radio)

Operating the DVD

•For safety reasons, “Video image”s cannot be viewed while your vehicle is in motion. To view “Video image”s, you must stop in a safe place and put on the parking brake before setting your route (see page 18 Interlock for details).

You can play a DVD-Video using the built-in DVD drive of the navigation system. This section describes operations for DVD-Video.

Selecting [DVD] as the source

1 Press the OPEN button and insert a disc you want to play to disc loading slot. The source changes and then playback will start.

❒If the disc is already set, touch the source icon and then touch [DVD].

➲For details, refer to “Selecting a source” ➞ Page 99

❒Also see at “Handling and Care of the Disc” and “Playable discs” in the Hardware Manual for more cautions about handling DVD-Video.

Screen configuration

(1)(4)(6) (5) (7) (3) (8)

(9)

(2)

(1) Source icon

Shows which source has been selected.

(2) Sound output indicator

Shows which sound output setting has been selected.

(3) Repeat range indicator

Shows which repeat range has been selected.

106