Pioneer AVIC-Z1 operation manual Display items, Information with the mark * appears only

Display items

NAVI	❒ Information with the mark (*) appears only
	when the route is set.
	❒ Depending on the conditions and settings,
	some items may not be displayed.

Current location

The current location of your vehicle. The tip of the triangular mark indicates your heading and the display moves automatically as you drive.

❒The center of the triangular mark is the cur- rent vehicle position.

Destination*

The checker-flag indicates your destination.

Guidance point*

The next guidance point (next turning point, etc.) is shown by a yellow flag.

The guidance points of up to three point ahead including the waypoint are displayed.

	waypoint
3	The checker-flag and number (1 to 5) indicates
Chapter	(2) Distance to the guidance point*
	your waypoint.
	(1) Name of the next street to be used*
Display	Touching	allows you to hear the infor-
	(3) Distance to the destination (or distance to
	mation again.
Map	waypoint)*
Read	The distance on this button shows the distance to
	the destination or to each waypoint. If waypoints
to	are set, the distance to the destination and the
	next waypoint chage with each touch.
How
	❒ When the vehicle position is on the route, the
	distance to the destination (or waypoint)
	appears. When the vehicle position is not on
	the route, the linear distance to the destina-
	tion (or waypoint) appears.

(4)Name of the street your vehicle is travel- ing along (or City Name, etc.)

(5)Compass

The red arrow indicates north. If the scale is less than 25 mi (50 km), touching the map changes the direction that it is displayed in (north up/ heading up). When the scale of the map is

greater than 25 mi (50 km), it is fixed to [north up].

Heading up:

The map display always shows the vehicle’s direction as proceeding toward the top of the screen.

North up:

The map display always has north at the top of the screen.

(6) Zoom in/Zoom out

Touch to change the map’s scale.

➲Changing the map’s scale ➞ Page 41

(7) Map scale

The scale of the map is indicated by distance. Changing the map’s scale ➞ Page 41

(8) VOICE icon

Touch to change to the voice recognition mode.

❒This is displayed only when the microphone for voice recognition is connected.

➲The voice operation of the navigation system ➞ Chapter 17

(9) Traffic status

This appears when an XM satellite radio tuner (GEX-P10XMT, sold separately) is connected, and traffic information is received.

TRFC — No problem.

ANTENNA — Improper antenna connection. UPDATING — Updating encryption code.

➲“Checking the Reception Status of the XM Tuner” ➞ Page 75

(10)Current time

(11)Estimated time of arrival (or travel time to your destination)*

The display alternates by pressing it.

The estimated time of arrival is automatically cal- culated from the Average Speed set and the actual average speed.

❒The estimated time of arrival is a guideline and may not correspond to the actual time of arrival.

➲How to set average speed ➞ Page 93

(12) Tracking dot

The tracking dot shows the route your vehicle has traveled by white dots.

➲Select the tracking setting ➞ Page 45

40