Pioneer AVIC-Z1 operation manual Changing the wide screen mode, Setting the parental lock

Touch [Parental Level].

❒When playing discs don’t have panscan system, playback is with [Letter Box] even if you select the [Panscan] setting. Con- firm whether the disc package bears like the 16 : 9 LB mark.

Setting the parental lock

Some DVD-Video discs let you use parental lock to give an restriction so that children can not watch a violent and adult oriented scenes. You can set the parental lock level in steps as desired.

❒When you set a parental lock level and then play a disc featuring parental lock, code num- ber input indications may be displayed. In this case, playback will begin when the correct code number is input.

Setting the code number and level

When you first use this function, register your code number. If you do not register a code num- ber, parental lock will not operate.

1 Touch [DVD-V Setup] in the System Set- tings menu.

2

3 Touch 0 — 9 to input a four digit code number.

4 While the input number is displayed, touch [Enter].

The code number is registered, and you can now set the level.

5 Touch any of 1 — 8 to select the desired level.

The parental lock level is set.

•Level 8 — Playback of the entire disc is possible (initial setting)

•Level 7 — Level 2 — Playback of discs for children and non-adult oriented discs is possible

•Level 1 — Playback of discs for children only is possible

❒If you want to change the parental level, enter the registered code number in the Step 3.

❒We recommend to keep a record of your code number in case you forget it.

❒ The parental lock level is recorded on the

disc. You can confirm it by looking at the	AV
disc package, included literature or on the
disc itself. With discs that do not feature a
recorded parental lock level, you cannot
use parental lock.

❒With some discs, parental lock operates to skip certain scenes only, after which nor- mal playback resumes. For details, refer to the disc’s instructions.

❒If you forget the registered code number, touch [Clear] 10 times on the screen in the Step 3. The registered code number is can- celed, letting you register a new one.

Changing the wide screen mode

•For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route (see page 18 Interlock for details).

1 Touch [Wide Mode] in the System Set-
tings menu.
The Wide Mode screen appears.
On the Wide Mode screen, you can select the	Chapter
following items:
Full, Just, Cinema, Zoom or Normal
Normal (normal):
A 4:3 picture is displayed as it is, giving you no	16
sense of disparity since its proportions are the
same as that of the normal picture.	withAudioVisual	CustomizingtheAudio
Full (full):
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3 TV
picture (normal picture) without any omis-
sions.
Just (just):		Setting
and the amount of enlargement increases
The picture is enlarged slightly at the center		related
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity even on a wide screen.
Cinema (cinema):

153