Epson 9600, 7600 LCD Indications in Normal Mode, Functions LCD panel display Indicator Setting

EPSON Stylus Pro 7600/9600 Revision A

1.4.2.2 LCD Indications in Normal Mode

Table 1-27. Indications (in Normal Mode)

Functions	LCD panel display	Indicator	PG
			setting
Ready to print	READY	*2	*1
Processing data	PRINTING	*2	*1
In power OFF sequence	POWER OFF
In ink sequence	WAIT		*1
Initial filling	INK CHARGING nnn%
Pause	PAUSE	*2
Reset	RESET
Initializing	WAIT
Waiting for paper initialize start	PRESS PAUSE BUTTON
trigger
Initializing paper	WAIT
Out of paper	PAPER OUT
Difference with roll paper and	LOAD XXX PAPER
sheet
Paper set lever is released	LOAD PAPER	*3
Paper jam	PAPER JAM
Cover open	COVER OPEN
Paper set lever is released during	SECURE PAPER LEVER
operation
Paper cutting error	PAPER NOT CUT
Paper not straight	PAPER NOT STRAIGHT
Paper check error	RELOAD PAPER
End of roll	PAPER OUT
Problem with paper output (sheet)	RELOAD PAPER
Ink out	INK OUT
Ink low	INK LOW		*1
No ink cartridge	NO INK CARTRIDGE
Defective ink cartridge	SET INK CARTRIDGE
Wrong cartridge	WRONG CARTRIDGE

Table 1-27. Indications (in Normal Mode) (continued)

Functions	LCD panel display	Indicator	PG
			setting
Command error	COMMAND ERROR
Type B interface error	OPTION I/F ERROR
Fatal error	SERVICE. REQ. nn
Maintenance request	MAINTENANCE REQ. nn		*1
Timer IC reset/NVRAM clear	WAIT
After replacing ink cartridge
Ink cover open	CLOSE INK CART. COVER
Wrong ink cartridge (dye/	WRONG CARTRIDGE
pigment)
Non-genuine cartridge	INVALID CARTRIDGE
Maintenance tank almost full	MAINTENANCE TANK
warning	ALMOST FULL
Maintenance tank full	MAINTENANCE TANK FULL
No maintenance tank	NO MAINTENANCE TANK
Unable to print error	UNABLE TO PRINT
Paper is too thick for cleaning	REMOVE PAPER
Ink is not enough for cleaning	NOT ENOUGH INK
Ink cartridge replacing	SET INK CARTRIDGE
Ink drying	INK DRY nn MIN		*5
Restart request	TURN PRINTER PWR OFF AND
	THEN ON
Restarting request	TURN PWR OFF AND ON

Note *1: When PG setting = WIDE or WIDER, “W” is displayed at the left of lower line. When PG setting = NARROW, “N” is displayed at the left of lower line.

*2: Ink remaining / available rate of maintenance tank are displayed with indicator.

*3: Suction is displayed with indicator.

*4: Character strings on the second line resulting from line feed above are displayed on the second line of LCD panel.

*5: It is displayed only for page delay.

NOTE: For details of error display, refer to “3.2.1 Errors (p.123)”.

Product Description Operating Panel 34