Epson 7600, 9600 service manual Consumables life, Reference value, Display Life, These indications

EPSON Stylus Pro 7600/9600 Revision A

1.4.3.27 Consumables life

†Cutter life

„How to calculate

The number of times the cutter has been used is calculated by counting down from 2000. The count is reduced by one every time one sheet is cut irrespective of paper sizes.

The counter is cleared at replacing the cutter with a new one.

„Display (Life)

100 ~ 81%	E∗∗∗∗∗F
80 ~ 61%	E∗∗∗∗	F
60 ~ 41%	E∗∗∗	F
40 ~ 21%	E∗∗	F
20% ~ 1%	E∗	F
Less than 1% remaining	F	F

„Maintenance Req. Not happen, because

•Cutter condition can be checked with cutting.

•It doesn’ t cause big obstacles.

•Users can replace a cutter easily.

„Fatal error Not happen.

„Counter clear

The counter is cleared at replacing the cutter with a new one.

CHECK	The indication as described above may not be accurate depending
POINT	on the conditions of use, thus it is given only as a yardstick.

†CR motor life monitor

„How to calculate

It is displayed with tube life (B1 width), because tube friction causes CR motor trouble. The tube life is calculated with the number of CR scan times.

Table 1-36. Reference value

Printer Model			Number of Passes		Condition
Stylus Pro 7600		250 million passes			B0/ Speed
Stylus Pro 9600		325 million passes			A1/ Speed
Note :	1 pass = 1 round trip
„	Display (Life)
	100 ~ 81%		E∗∗∗∗∗F
	80 ~ 61%		E∗∗∗∗	F
	60 ~ 41%		E∗∗∗	F
	40 ~ 21%		E∗∗	F
	20% ~ 1%		E∗	F
	Less than 1% remaining		F	F

„Maintenance Req.

It is happened when the life is less than 4%.

„Fatal error

When the remainder of the life is judged to be 0 by taking into account damage to the tube, service call occurs.

„Counter clear

When “CLEAR COUNTERS CR MOTOR” or “CLEAR COUNTERS CR TOTAL” in Maintenance mode 2 is executed, the counter is cleared.

CHECK	Information on these values is needed only when service personnel
POINT	perform maintenance work. Do not inform users of the meaning of
	these indications.

Product Description Operating Panel 51