Epson 9600, 7600 Borderless Print Roll Paper, Acceptable Sheet Sizes Acceptable Paper

EPSON Stylus Pro 7600/9600 Revision A

BORDERLESS PRINT ROLL PAPER

Borderless print for right and left is enssured for roll paper with any of the paper widths as specified in Figure 1-9below.

NOTE: 300 mm, 400 mm, 500 mm and 600 mm are supported for Europe.

†Paper width

Table 1-8.

Stylus Pro 7600

Stylus Pro 9600

Japan

8”

210

10”

-

12”

14”

-

16”

-

20”

-

24”

36”

44”

mm

USA/Europe

8”

210

10”

300

12”

14”

400

16”

500

20”

600

24”

36”

44”

mm

mm

mm

mm

mm

Note 1: Paper should have no wrinkles, tears, or folds and the surface should be smooth.

2:The force to remove the end of the roll paper from the core should be between 300 gf and 2000 gf

3:If core is used, a product-exclusive option (roll paper spindle 3 inch) is necessary.

4:It is used under normal conditions. (temperature 15°C ~ 25°C, humidity 40 ~ 60%RH)

5:Roll paper can be printed before paper comes out of the core.

(Reference: Remaining paper length is 30cm approx. when roll paper come out of the core.)

6:The mechanism clips print data out of over-printable area for borderless printing.

1.2.5.2 Sheet

ACCEPTABLE PAPER

The printer accepts following plain paper and special paper. With any other paper, proper paper feeding and satisfactory print quality are not ensured.

†Paper Size (The sizes indicated in bold italic are only for Stylus Pro 9600.)

Table 1-9. Acceptable Sheet Sizes (Acceptable Paper)

Paper Size	Size (W ⋅ H)	Paper Size	Size (W ⋅ H)
B0+*	1118 mm ⋅ 1580 mm	A4	210 mm ⋅ 297 mm
B0 *	1030 mm ⋅ 1456 mm	US E	34 ⋅ 44 in
B1 *	728 mm ⋅ 1030 mm	US D	22 ⋅ 34 in
B2	515 mm ⋅ 728 mm	US C	17 ⋅ 22 in
B3	364 mm ⋅ 515 mm	US B	11 ⋅ 17 in
B4	257 mm ⋅ 364 mm	44 ⋅ 36 in *	44 ⋅ 36 in
A0+ *	914 mm ⋅ 1292 mm	30 ⋅ 24 in	30 ⋅ 24 in
A0 *	841 mm ⋅ 1189 mm	Letter	8.5 ⋅ 11 in
A1+	24 ⋅ 36 in	B1 (wide) *	1030 ⋅ 728 mm
A1	594m ⋅ 841 mm	8 ⋅ 10 in	8 ⋅ 10 in
A2	420 mm ⋅ 594 mm	30 cm ⋅ 45 cm	30 cm ⋅ 45 cm
A3+	329 mm ⋅ 483 mm	60 cm ⋅ 90 cm	60 cm ⋅ 90 cm
A3	297 mm ⋅ 420 mm

Note "*": Only for Stylus Pro 9600

†Thickness

„0.08 ~ 1.5 mm (paper length: 279 mm ~ 728 mm)

„0.08 ~ 0.5 mm (paper length: 728 mm ~ 1580 mm)

NOTE 1: Paper should have no wrinkles, tears, or folds and the surface should be smooth.

2:0.08 ~ 1.50 mm paper thickness is supported for long-edge insertion.

3:The sizes indicated in bold italic are only for Stylus Pro 9600.

Product Description Basic Specifications 16