Epson 9600, 7600 When replacing the print head, the following adjustment, Procedures are required

EPSON Stylus Pro 7600/9600 Revision A

4.Loosen the left screw for the Head Holder, remove the right screw (M3⋅6) and release the Head Holder downward.(See Figure 4-26)

5.Take out the head by lifting its inner side and release the 2 FFCs. (See Figure 4-27)

„ Take care not to touch the nozzle side of the print head to be installed and not to let dust or dirt adhere to the nozzles.

„When installing the carriage, take care not to scratch the nozzle side.

ADJUSTMENT	When replacing the print head, the following adjustment
REQUIRED	procedures are required.
	„ Refer to “5.1.4.1 Print Head Adjustment” (p.212)

Loosen the screw

Screw (M3⋅6)

Head Holder

Figure 4-26. Head Holder Release

Print Head

Figure 4-27. Head Removal

Disassembly & Assembly Disassembly and Assembly of Carriage (CR) Mechanism 172