Epson 7600, 9600 service manual Parameter Initialize, Execute parameter initialization

EPSON Stylus Pro 7600/9600 Revision A

5.2.6.1 Parameter Initialize

Execute parameter initialization.

CHECK	Without replacing the relevant parts, never use this function to
POINT	initialize the counter; otherwise, control after that will not agree
	with the condition of the printer mechanism.

	Table 5-28.
Item	Contents
	CR motor round trip count
	PF motor travel
	Head ink discharge count (Each color)
	Cleaning count
	The number of printed sheets
	Ink volume counter
	Waste ink counter
	Cutting count
	Gap adjustment value
	CR origin compensation value (Capping position)
	PF origin compensation value
	Head slide origin compensation value
All initialization	Front sensor position compensation value
	Rear sensor position compensation value
	Edge sensor longitudinal position compensation value
	Edge sensor lateral position compensation value
	Cutter longitudinal position compensation value
	Flushing position
	PF distance correction 1 ~ 3
	Serial number
	Wiping count
	Rubbing count
	Ink tube round trip count
	Paper presser lever up and down count
	Cover Open/Close count
	Ink lever up and down count
Capping position initialization	CR origin compensation value (Capping position)
PF resolution initialization	PF distance correction1 ~ 3
Serial number initialization	Serial number
Head record initialization	Head ink discharge count (Each color))
Wiper record initialization	Wiping count
Rubbing record initialization	Rubbing count

	Table 5-28.
Item	Contents
Waste ink record initialization	Waste ink counter
CR motor record initialization	CR motor round trip count
PF motor record initialization	PF motor travel
Lever record initialization	Paper presser lever up and down count
Cover record initialization	Cover Open/Close count
Ink lever record initialization	Ink lever up and down count

Adjustment Self-diagnostic Function 261