Epson 9600 Review error 0002000C, CPU slot illegal command exception error 100001A0, CPU error

EPSON Stylus Pro 7600/9600 Revision A

3.2.4.35 Review error (0002000C)

†Explanation:

There may be a case where the combination of the DIP Switch setting positions on the Main Board is not supported by the firmware. In such a case, this message is displayed and the printer stops operating.

†Cause of trouble:

Driver circuit board review and the state of the DIP switch are not consistent with the program version.

†Remedy:

„Check driver circuit board review and state of DIP switch.

„Check the DIP Switch setting. (See p.209)

†Remedy:

•Firmware Reinstallation (p.219)

•Replace the MAIN Board (C472 MAIN) (p.207).

3.2.4.39 CPU slot illegal command exception error (100001A0)

†Cause of trouble:

Faulty CPU soldering. Program trouble or generation error.

†Remedy:

•Firmware Reinstallation (p.219)

•Replace the MAIN Board (C472 MAIN) (p.207).

3.2.4.36 CPU address error (load misalignment) (100000E0)

†Cause of trouble:

Defective circuit board or faulty CPU soldering. Program trouble or generation error.

†Remedy:

•Firmware Reinstallation (p.219)

•Replace the MAIN Board (C472 MAIN) (p.207).

3.2.4.37 CPU address error (storage misalignment) (10000100)

†Cause of trouble:

Defective circuit board or faulty CPU soldering. Program trouble or generation error.

†Remedy:

•Firmware Reinstallation (p.219)

•Replace the MAIN Board (C472 MAIN) (p.207).

3.2.4.38 CPU reserve command code exception error (10000180)

†Cause of trouble:

Defective circuit board or faulty CPU soldering. Program trouble or generation error.

3.2.4.40 CPU DMA address error (100005C0)

†Cause of trouble:

Defective circuit board or faulty CPU soldering. Program trouble or generation error.

†Remedy:

•Firmware Reinstallation (p.219)

•Replace the MAIN Board (C472 MAIN) (p.207).

3.2.4.41 CPU error (10000xxx)

†Cause of trouble:

Defective circuit board or faulty CPU soldering. Program trouble or generation error.

†Remedy:

•Firmware Reinstallation (p.219)

•Replace the MAIN Board (C472 MAIN) (p.207).

Troubleshooting Error Display 146